Machinery & Energetics

Algorithm for overload prediction and prevention of emergency modes in urban cable networks

Andrii Tkachenko
Download article
Abstract

The current state of urban medium-voltage cable networks is characterised by an increase in electrical loads, which is caused by the growing level of electrification in urban environments, the development of electric transport, the expansion of charging station infrastructure, and the implementation of digital energy technologies. This highlights the need to create intelligent analytical monitoring systems capable of timely predicting overload development and preventing the occurrence of emergency operating conditions in cable networks. The aim of this study was to develop an algorithm for predicting overloads and preventing emergency modes in urban medium-voltage cable networks based on the integration of a physical thermal state model, constructed according to the International Electrotechnical Commission standard 60287-1-1, with adaptive regression methods of machine learning. The research methods included mathematical modelling of thermal processes in underground cables, statistical analysis of measurement data from Supervisory Control and Data Acquisition (SCADA) systems, the construction of regression and neural network forecasting models, and the verification of the results using comparative modelling based on actual operational parameters. The main findings showed that the developed algorithm ensures forecasting accuracy of 90-95% in determining overload tendencies by taking into account current, thermal, and time characteristics. The system is capable of identifying the risk of critical conditions 1.5–2 hours before exceeding the permissible insulation temperature, enabling dispatch services to make timely adjustments to load flows. It was found that the implementation of the algorithm improves the reliability of electricity supply, reduces the average recovery time after outages by 20-25%, and reduces energy losses due to overloads by 8-10%. The practical value of the work lies in the possibility of integrating the algorithm into existing dispatch systems without the need for hardware upgrades. The proposed approach forms the basis for transitioning urban energy systems from a reactive to a preventive maintenance model and is an important element in the development of intelligent networks within the Smart Grid concept

Keywords

cable thermal state, underground cable networks, machine learning, SCADA data, Smart Grid, electricity supply reliability

Suggested citation
Tkachenko, A. (2025). Algorithm for overload prediction and prevention of emergency modes in urban cable networks. Machinery & Energetics, 16(4), 89-98. https://doi.org/10.31548/machinery/4.2025.89
References
  1. Abumohsen, M., Owda, A.Y., & Owda, M. (2023). Electrical load forecasting using LSTM, GRU, and RNN algorithms. Energies, 16(5), article number 2283. doi: 10.3390/en16052283.
  2. Ahmad, T., Madonski, R., Zhang, D., Huang, C., & Mujeeb, A. (2022). Data-driven probabilistic machine learning in sustainable smart energy/smart energy systems: Key developments, challenges, and future research opportunities in the context of smart grid paradigm. Renewable and Sustainable Energy Reviews, 160, article number 112128. doi: 10.1016/j.rser.2022.112128.
  3. Al-Dulaimi, A.A., Guneser, M.T., Hameed, A.A., Márquez, F.P.G., & Gouda, O.E. (2024). Adaptive FEM-BPNN model for predicting underground cable temperature considering varied soil composition. Engineering Science and Technology, an International Journal, 51, article number 101658. doi: 10.1016/j.jestch.2024.101658.
  4. Asorza, J.E.G., Leon Colqui, J.S., Kurokawa, S., & Pissolato Filho, J. (2024). Analysis of increased induced voltages on the sheath of double-circuit underground transmission lines guaranteeing ampacity. Energies, 17(7), article number 1637. doi: 10.3390/en17071637.
  5. Bao, S., Bao, H., Jin, M., Ruan, Y., Shi, Y., & Yang, C. (2025). Prediction of bundle-conductor ampacity based on transformer-LSTM. Frontiers in Physics, 13, article number 1603239. doi: 10.3389/fphy.2025.1603239.
  6. Chen, X., Huang, G., Gao, X., Ou, S., Li, Y., & Hezam, I.M. (2021). BN-RA: A hybrid model for risk analysis of overload-induced early cable fires. Applied Sciences, 11(19), article number 8922. doi: 10.3390/app11198922.
  7. Dinmohammadi, F., Flynn, D., Bailey, C., Pecht, M., Yin, C., Rajaguru, P., & Robu, V. (2019). Predicting damage and life expectancy of subsea power cables in offshore renewable energy applications. IEEE Access, 7, 54658-54669. doi: 10.1109/ACCESS.2019.2911260.
  8. Elazim, S.M.A., Elkholy, M.H., Elgarhy, A., Senjyu, T., Gamil, M.M., Song, D., Ali, E.S., Ludin, G.A., Irshad, A.S., & Lotfy, M.E. (2025). Enhancing stability and power quality in electric vehicle charging stations powered by hybrid energy sources through harmonic mitigation and load management. Scientific Reports, 15, article number 28077. doi: 10.1038/s41598-025-14143-4.
  9. Fernandez Martinez, R., Alberdi, R., Fernandez, E., Albizu, I., & Bedialauneta Landaribar, M.T. (2024). Improvement of transmission line ampacity utilization via machine learning-based dynamic line rating prediction. SSRN Electronic Journal. doi: 10.2139/ssrn.4800867.
  10. IEC 60287-1-1. (2006). Electric cables – calculation of the current rating – part 1-1: Current rating equations (100% load factor) and calculation of losses – general. Retrieved from https://cdn.standards.iteh.ai/samples/14148/a2d7245605294d2ca22919d912944609/IEC-60287-1-1-2006.pdf.
  11. Khandeparkar, V., Shreshtha, & Ramu, S.K. (2025). Effectiveness of supervised machine learning models for electrical fault detection in solar PV systems. Scientific Reports, 15, article number 34919. doi: 10.1038/s41598-025-18802-4.
  12. Kim, Y., Nguyen Cong, H., Dinh, B.H., & Kim, H. (2024). Effect of ambient air and ground temperatures on heat transfer in underground power cable systems buried in newly developed cable bedding material. Geothermics, 125, article number 103151 doi: 10.1016/j.geothermics.2024.103151.
  13. Lei, H., Rufeng, L., Baofeng, T., Kaifeng, Z., Binyu, J., & Lin, X. (2023). Evaluating and forecasting methods for assessing the health status of cables under the load of large-scale electric vehicle charging. Frontiers in Energy Research, 11, article number 1345840. doi: 10.3389/fenrg.2023.1345840.
  14. Li, Q., Guo, K., Wang, S., Zhang, J., & Zhang, Z. (2024). Research on intelligent identification algorithm for preventing external damage behavior of power cable based on machine learning. Applied Mathematics and Nonlinear Sciences, 9(1). doi: 10.2478/amns-2024-3331.
  15. Lin, M., Shi, Q., & Wang, T. (2023). Temperature and humidity sensor monitoring of directly buried cable based on temperature field distribution simulation of power cable. Journal of Measurements in Engineering, 11(2), 154-165. doi: 10.21595/jme.2023.23178.
  16. Olojede, D., King, S., & Jennions, I. (2025). Application of machine learning in power grid fault detection and maintenance. Energy Informatics, 8, article number 119. doi: 10.1186/s42162-025-00574-w.
  17. Pang, D., Zhang, Y., Li, Y., Zhou, Y., Lu, Z., & Qi, M. (2021). Fast calculation method of directly buried cables ampacity. Vibroengineering Procedia, 38, 148-153. doi: 10.21595/vp.2021.22019.
  18. Peng, N., Liu, X., Liang, R., Tang, Z., Ren, X., Hu, Y., & Li, G. (2022). Edge computing-based fault sensing of distribution cables based on time-domain analysis of grounding line current signals. IEEE Transactions on Power Delivery, 37(5), 4404-4417. doi: 10.1109/TPWRD.2022.3170294.
  19. Sucurovic, M., Klimenta, D., & Tasic, D. (2024). Correction of the IEC formula for the eddy-current loss factor: The case of single-core cables in trefoil formation with metallic screens bonded and earthed at one end. Facta Universitatis, Series: Electronics and Energetics, 37(2), 391-408. doi: 10.2298/FUEE2402391S.
  20. Szultka, S., Czapp, S., Tomaszewski, A., & Tariq, H. (2024). Calculation of maximum permissible load of underground power cables using numerical modelling of stabilized backfill conditions. Applied Sciences, 14(20), article number 9233. doi: 10.3390/app14209233.
  21. Yu, H., Niu, S., Shang, Y., Shao, Z., Jia, Y., & Jian, L. (2022). Electric vehicles integration and vehicle-to-grid operation in active distribution grids: A comprehensive review on power architectures, grid connection standards and typical applications. Renewable and Sustainable Energy Reviews, 168, article number 112812. doi: 10.1016/j.rser.2022.112812.
  22. Zhang, Z., Liu, W., Zeng, L., He, S., Zhou, H., & Ruan, J. (2024). Long-term ampacity prediction method for cable intermediate joints based on the Prophet model. Processes, 12(4), article number 748. doi: 10.3390/pr12040748.