As shown in the work shows that due to the rapid growth of the number of machines, mechanisms, vehicles, the use of fuels and lubricants is constantly increasing. Despite all precautions, spills and flows of oil products occur in significant volumes, it has a negative impact on the ecological state of the environment. It has been proven how oil products pollute the soil and water environment when get into. Their cleaning depends on the choice of methods, means, measures, technologies and techniques. The method of sorption (absorption) is now becoming especially widespread. With the help of sorption, at relatively low costs, it is possible to provide effective cleaning of soil and water from oil products. The efficiency of carbon sorbents produced by carbonization from by-products of the wood industry, that is, pine sawdust, has been substantiated. The essence, processes, technologies, transformations in the production of carbon sorbents based on pine sawdust are shown. The physicochemical, structural and sorption properties of the pine sawdust, its fractions and carbon sorbents produced on it are presented. It has been revealed the ecological and economic advantages of carbon sorbents based on pine sawdust for cleaning from petroleum products in comparison with other cleaning methods
carbon sorbents, environment, economic indicators, carbonization, oil products, sorbents, sorption capacity, pine sawdust
[1] Wychodnik, K., Gałęzowska, G., Rogowska, J., & Wolska, L. (2020). Poultry farms as a potential source of environmental pollution by pharmaceuticals. Molecules, 25(5), article number 1031. doi: 10.3390/molecules25051031.
[2] Liu, J., Chen, S., Wang, H., & Yan, J. (2016). Evolution of China’s urban energy consumption structure – a case study in Beijing. Energy Procedia, 88, 88-93. doi: 10.1016/j.egypro.2016.06.029.
[3] Sethi, M. (2015). Location of greenhouse gases emissions from thermal power plants in India along the urbanruralcontinuum. Journal of Cleaner Production, 103, 586-600. doi: 10.1016/j.jclepro.2014.10.067.
[4] Issac, M.N, & Kandasubramanian, B. (2021). Effect of microplastics in water and aquatic systems. Environmental Science and Pollution Research, 28, 19544-19562. doi: 10.1007/s11356-021-13184-2.
[5] Anbumani, S., & Kakkar, P. (2018). Ecotoxicological effects of microplastics on biota: A review. Environmental Science and Pollution Research, 25, 14373-14396. doi: 10.1007/s11356-018-1999-x.
[6] Rogovskii, I.L., Kalivoshko, O.M., Maksimovich, K.Yu., & Maksimovich, E.Yu. (2021). Research of mixed carbon sorbents for removal of oil products from water and soil for preservation of environmental infrastructure. IOP Conference Series: Earth and Environmental Science, 720, article number 012108. doi: 10.1088/1755-1315/720/1/012108.
[7] Zaborowska, M., Wyszkowska, J., Borowik, A., & Kucharski, J. (2021). Bisphenol A−A dangerous pollutant distorting thebiological properties of soil. International Journal of Molecular Sciences, 22, article number 12753. doi: 10.3390/ijms222312753.
[8] Gingrich, J., Filipovic, D., Conolly, R., Bhattacharya, S., & Veiga-Lopez, A. (2021). Pregnancy-specific physiologicallybased toxicokineticmodels for bisphenol A and bisphenol S. Environment International, 147, article number 106301. doi: 10.1016/j.envint.2020.106301.
[9] Rogovskii, I.L., Kalivoshko, S.M., Voinash, S.A., Korshunova, E. E., Sokolova, V.A., Obukhova, I.A., & Kebko, V.D. (2020). Research of absorbing properties of carbon sorbents for purification of aquatic environment from oil products. IOP Conference Series: Earth and Environmental Science, 548, article number 062040. doi: 10.1088/1755-1315/548/6/062040.
[10] Mishra, M., Singh, A.P., Kumar, M., & Chand, M. (2021). Investigation of the microwave absorbing properties on polymer sheets. Journal of Materials Science: Materials in Electronics, 32(21), 1-10. doi: 10.1007/s10854-021-05485-6.
[11] Knapik, E. (2020). Separation of BTX fraction from reservoir brines by sorption onto hydrophobizedbiomass in a fixed-bed-column system. Energies, 13(1064), 2-15. doi: 10.3390/en13051064.
[12] Dissanayake, D., Jayasingheb, C., & Jayasinghe, M. (2017). A comparative embodiedenergy analysis of a house with recycledexpanded polystyrene based foam concretewall panels. Energy and Buildings, 135, 85-94. doi: 10.1016/j.enbuild.2016.11.044.
[13] Arezoumandi, M., Smith, A., Volz, J., Khayat, K. (2015). An experimental study on flexuralstrength of reinforced concrete beams with 100% recycled concrete aggregate. Engineering Structures, 88, 154-162. doi: 10.1016/j.engstruct.2015.01.043.
[14] Rogoskii, I., Mushtruk, M., Titova, L., Snezhko, O., Rogach, S., Blesnyuk, O., Rosamaha, Yu., Zubok, T., Yeremenko, O., & Nadtochiy, O. (2020). Engineering management of starter cultures in study of temperature of fermantation of sour-milk drink with apiproducts. Potravinarstvo Slovak Journal of Food Sciences, 14, 1047-1054. doi: 10.5219/1437.
[15] Major, M., & Halbiniak, J. (2019). Effect of adhesion between EPS granules and cement matrix on the characteristics of lightweight concretes. IOP Conference Series Materials Science and Engineering, 603(3), article number 032054. doi: 10.1088/1757-899X/603/3/032054.
[16] Rogovskii, I.L., Polishchuk, V.M., Titova, L.L., Sivak, I.M., Vyhovskyi, A.Yu., Drahnev, S.V., & Voinash, S.A. (2020). Study of biogas during fermentation of cattle manure using a stimulating additive in form of vegetable oil sediment. ARPN Journal of Engineering and Applied Sciences, 15(22), 2652-2663.
[17] Smirnova, O.E., & Pichugin, A.P. (2019). Structural and thermal insulation products based on vegetable raw materials. IOP Conference Series Materials Science and Engineering, 687(2), article number 022024. doi: 10.1088/1757-899X/687/2/022024.
[18] Pichugin, A.P., Denisov, A.S., Khritankov, V.F., & Rubtsova, N.V. (2014). Experience and possibilities of using plant materials in various objects construction. Innovations and Food Security, 3(5), 22-28.
[19] Canakci, H., Alak, D., & Celik, F. (2016). Evaluation of shear strength properties of modified expanded polystyrene aggregate. Procedia Engineering, 161, 606-610. doi: 10.1016/j.proeng.2016.08.708.
[20] Cadere, C., Barbuta, M., Rosca, B., Serbanoiu, A., Burlacu, A., Oancea, I. (2018). Engineering properties of concrete with polystyrene granules. Procedia Manufacturing, 22, 288-293. doi: 10.1016/j.promfg.2018.03.044.