Methods of improving the quality of regulation of technological parameters by combining various intelligent control algorithms in one automation system, which helps to reduce energy costs by 10-13%, are analyzed. It has been established that heating and ventilation systems have the highest energy consumption for indoor buildings (on average, more than 4,000 m3 of natural gas and almost 1,000 kWh of electricity are consumed per day for heating and ventilation in an industrial greenhouse. Correlation analysis of links between external disturbances and energy costs that ensure compliance with the technology of plant production, confirmed the hypothesis of conditions of uncertainty in the operation of industrial greenhouses are formed by random disturbances, incomplete information about the biological component, with linear correlation coefficients not exceeding r<0.35. both for forecasting energy costs and for the formation of energy efficient management strategies. Based on the use of fuzzy logic methods and genetic algorithm, models for finding and using optimal parameters of PI controller settings adapted to changes in the operating conditions of the automation system have been developed and studied. This provides better regulation in conditions of uncertainty, the time of regulation, over-regulation is reduced by two to three times. To create an energy-efficient microclimate management system in industrial greenhouses, operating in conditions of uncertainty, a neural network model for predicting the energy consumption of natural gas and electricity has been developed. The input parameters of the neural network forecasting model are: the value of external and internal air temperatures of the greenhouse, the value of relative humidity, the solar radiation absorbed by the greenhouse and the level of carbon dioxide in the greenhouse. The outputs of the forecasting model are the values of natural gas and electricity costs. The structural and functional scheme of the temperature and humidity control automation system in industrial greenhouses has been improved by combining intelligent algorithms for stabilizing the operation of technological equipment at the lower management level and optimizing energy costs by forecasting them at the upper level. The introduction of such a system saves up to 13% on natural gas for heating and up to 10% on electricity
energy efficiency, resource efficiency, microclimate parameters, closed soil structures, industrial greenhouse, intelligent control system
[1] Wróbel, T. (2014). Characterization of bimetallic castings with an austenitic working surface layer and an unalloyed cast steel base. Journal of Materials Engineering and Performance, 23(5), 1711-1717. doi: 10.1007/s11665-014-0953-4.
[2] Eivani, A.R., & Karimi Taheri, A. (2007). A new method for producing bimetallic rods. Materials Letters, 61(19-20), 4110-4113. doi: 10.1016/j.matlet.2007.01.046.
[3] Kizu, T., Nagataki, Y., Inazumi, T., & Hosoya, Y. (2001). Effects of chemical composition and oxidation temperature on the adhesion of scale in plain carbon steels. ISIJ International, 41(12), 1494-1501.
[4] Lavrishchev, A.V., et al. (2021). Investigation of the solid-phase joint of VT-14 titanium alloy with 12KH18N10T stainless steel obtained by diffusion welding through intermediate layers. Metals, 11(8), number article 1325. doi: 10.3390/met11081325.
[5] Zhang, H.L., Huang, P.Z., Sun, J., & Gao, H. (2004). Morphological healing evolution of penny-shaped fatigue microcracks in pure ironat elevated temperatures. Applied Physics Letters, 85, 1143-1145. doi: 10.1063/1.1780592.
[6] Göbl, M., Eder, H., Prestl, A., Siller, I., & Schnitzer, R. (2020). Diffusion bonding of high-alloyed tool steels with maraging and precip-itation hardening steels. Metals, 10(12), number article 1622. doi: 10.3390/met10121622.
[7] Aftandiliants, Y., & Gnyloskurenko, S. (2021). Development of advanced alloy steels for machinery. Engineering for Rural Development, 20, 706-711.
[8] Du, J., Wang, H., & Zhao, R. (2013). Size-dependent thermodynamic properties and equilibrium constant of chemical reaction in nanosystem: an experimental study (II). The Journal of Chemical Thermodynamics, 65, 29-33. doi: 10.1016/j.jct.2013.05.033.
[9] Rogovskii, I.L., Titova, L.L., Voinash, S.A., Melnyk, V.I., Remshev, E.Yu., Galiyev, G.R., Nuretdinov, D.I., & Vornacheva, I.V. (2021). Design of landing of assembly machine building units with circulating load rolling bearing rings. Journal of Physics, 1889, number article 042004. doi: 10.1088/1742-6596/1889/4/042004.
[10] Yang, L., et al. (2021). Discovery of complex oxides via automated experiments and data science. Proceedings of the National Academy of Sciences, 118(37), number article e2106042118. doi: 10.1073/pnas.2106042118.
[11] Behrens, B.-A., Brunotte, K., Peddinghaus, J., & Heymann, A. (2022). Influence of dwell time and pressure on SPS process with titanium aluminides. Metals, 12(1), number article 83. doi: 10.3390/met12010083.
[12] Nazarenko, I., Mishchuk, Y., Mishchuk, D., Ruchynskyi, M., Rogovskii, I., Mikhailova, L., Titova, L., Berezovyi, M., & Shatrov, R. (2021). Determiantion of energy characteristics of material destruction in the crushing chamber of the vibration crusher. Eastern-European Journal of Enterprise Technologies, 4(7(112), number article 49. doi: 10.15587/1729-4061.2021.239292.
[13] Veklich, A., Tmenova, T., Zazimko, O., Trach, V., Lopatko, K., Titova, L., Boretskij, V., Aftandiliants, Y., Lopatko, S., & Rogovskiy, I. (2020). Regulation of biological processes with complexions of metals produced by underwater spark discharge. Springer Proceedings in Physics. Nanostructure Surfaces, and Their Applications, 247, 283-306. doi: 10.1007/978-3-030-52268-1_23.
[14] Lutz, J., & Pernicka, E. (2007). Energy dispersive X-ray fluorescence analysis of ancient copper alloys: Empirical values for precision and accuracy. Archaeometry, 38(2), 313-323. doi: 10.1111/j.1475-4754.1996.tb00779.x.
[15] Mukhametzyanov, T., Fatkhutdinova, A., & Schick, C. (2022). Step-scan differential calorimetry of protein denaturation: Modeling and experiment. Thermochimica Acta, 710, number article 179181. doi: 10.1016/j.tca.2022.179181.
[16] Rogovskii, I.L., Titova, L.L., Voinash, S.A., Sokolova, V.A., Pushkov, Yu.L., Krivonogova, A.S., & Kokieva, G.E. (2020). Modeling the distribution of internal stresses in surface strengthened layer of steel parts after cementation and hardening. Journal of Physics: Conference Series, 1679, number article 042069. doi: 10.1088/1742-6596/1679/4/042069.
[17] Wang, Y., Zhou, B., Zhao, R., Wang, B., Liu, Q., & Dai, M. (2022). Super-accuracy calculation for the half width of a voigt profile. Mathematics, 10, number article 210. doi: 10.3390/math10020210.
[18] Chausov, M., Brezinova, J., Pylypenko, A., Maruschak, P., Titova, L., & Guzanova. A. (2019). Modification of mechanical properties of high-strength titanium alloys VT23 and VT23m due to impact-oscillatory loading. Metals, 9(1), articlle number 80. doi: 10.3390/met9010080.
[19] Mahar, A., Wang, P., Ali, A., Awasthi, M.K., Lahori, A.H., Wang, Q., Li, R., & Zhang, Z. (2020). Challenges and opportunities in the phytoremediation of heavy metals contaminated soils: A review. Ecotoxicology and Environmental Safety, 126, 111-121. doi: 10.1016/j.ecoenv.2015.12.023.
[20] Abdallah, A., Reichel, E., Heinisch, M., Clara, S., & Jacoby, B. (2021). Symmetric plate resonators for viscosity and density measurement. Procedia Engineering, 87, 36-39. doi: 10.1016/j.proeng.2014.11.260.